Bridge Heavy Duty Macerator/Tenderizer, Model HDCC
The Bridge Heavy Duty Macerator/Tenderizer is designed to handle large pieces of meat. The large diameter spring loaded blades insure deep penetration into the product.
Large diameter blades provide deep penetration while the floating top knife assembly, with an air hold down system, makes for a more uniform cut across an uneven product. Depth of cut and upward movement of blades controlled by adjustable stops. A chute discharge into your massaging tanks or vats.
Belt Widths Available: 14"and 22"
Bridge Heavy Duty Macerator/Tenderizer, Model HDTC
A heavy duty tenderizer allows for the cutting of larger pieces of meat or poultry. Large diameter blades provide deep penetration while the floating top knife assembly, with an air hold-down system, makes for a more uniform cut across an uneven product. Depth of cut and upward movement of blades controlled by adjustable stops. The bottom knife shaft is removable and can be replaced with a Blank Bottom Roller ( Includes Blank Bottom Roller ) in order to cut product on one (1) side only, two (2) times.
Belt Widths Available: 14" and 22"
Specifications
2HP Motor
220/440 Volt, 3 Phase
50/60 Cycle, 110 Volt Control
Capacity: Approximately 15,000 Lbs. per hour
Options:
Hydraulic Drive
Top Cut Only
All material on this page is the property of Bridge Machine Co.
and may not be distributed without written permission.